Looking for updated timesaver shortcuts

[Paul1114 0]

Hello,

I'm new in here and i am confussed about where to find most update version of the "James shortcuts", also, if petitoning for parent , would i need to change from CR1 to IR5?

[dougyceci 0]

Here it the link I have to the shortcuts. Takes you to a couple of posts which should be helpful.

http://www.visajourney.com/forums/index.php?showtopic=117 as for the second question, sorry, can't help but sure someone else will.

Doug

[lquin 0]

Hello,

I'm new in here and i am confussed about where to find most update version of the "James shortcuts", also, if petitoning for parent , would i need to change from CR1 to IR5?

I have no idea what an IR-5 is ?

[aussiewench 9]

Paul

The link Doug provided contains the NVC timesavers and James Shortcuts. If you read the entire thread you will find many questions answered in regards to them, including IR-5. According to one experience, yes you need to replace CR-1 with IR-5.

There is a hiccup with the site that generates the barcode but this can be overcome by using 'MS Paint' or similar program. Take note of the several last posts in the Timesavers thread.

[Paul1114 0]

Paul

The link Doug provided contains the NVC timesavers and James Shortcuts. If you read the entire thread you will find many questions answered in regards to them, including IR-5. According to one experience, yes you need to replace CR-1 with IR-5.

There is a hiccup with the site that generates the barcode but this can be overcome by using 'MS Paint' or similar program. Take note of the several last posts in the Timesavers thread.

THANKS ALL, GREAT INFORMATION!!!

[Paul1114 0]

Paul

The link Doug provided contains the NVC timesavers and James Shortcuts. If you read the entire thread you will find many questions answered in regards to them, including IR-5. According to one experience, yes you need to replace CR-1 with IR-5.

There is a hiccup with the site that generates the barcode but this can be overcome by using 'MS Paint' or similar program. Take note of the several last posts in the Timesavers thread.

THANKS ALL, GREAT INFORMATION!!!

i was able to create the barcode but the wording " Powered by IDAutomation.com" appears under this barcode, is this ok? am i doing the right thing? , would it help if I modify size of this barcode?

Thanks.

[aussiewench 9]

Paul

The link Doug provided contains the NVC timesavers and James Shortcuts. If you read the entire thread you will find many questions answered in regards to them, including IR-5. According to one experience, yes you need to replace CR-1 with IR-5.

There is a hiccup with the site that generates the barcode but this can be overcome by using 'MS Paint' or similar program. Take note of the several last posts in the Timesavers thread.

THANKS ALL, GREAT INFORMATION!!!

i was able to create the barcode but the wording " Powered by IDAutomation.com" appears under this barcode, is this ok? am i doing the right thing? , would it help if I modify size of this barcode?

Thanks.

Paul

That is the problem I referred to in my earlier post. This is something new that has just started happening a week or so ago. Keep the sizing the same as instructed, but you will need to edit out the " Powered by IDAutomation.com" by using a program such as 'MS paint' and then pasting into the sheet. Until I have time to update the shortcuts by finding another barcode generating site, this is the short term fix.

[simple_male 1]

Hello,

I'm new in here and i am confussed about where to find most update version of the "James shortcuts", also, if petitoning for parent , would i need to change from CR1 to IR5?

Yes, for parent, it will be IR5 instead of CR1. Yes, I am aware of the "generated by so and so," but if you can delete this, then your barcode will be fine. There were some posts regarding how it can be done.